Road cyclist riding fast in an aero position – CycleFit Europe

Bike Fitting

Custom Bike CAD Design in Bensheim

Your fit data becomes a dimensioned frame drawing for a custom build. Brand-neutral, no commission, and tied to no framebuilder.

A custom frame is only as good as the numbers it is built from. If no production bike fits, or you have already decided to have one built, this session ends with a drawing rather than a recommendation.

What you end up with

Your position is worked out on the fit bike first, not estimated. From that data comes a dimensioned frame geometry: stack, reach, seat angle, head tube, cockpit and the components that have to match it.

The result is a document a framebuilder can work from without guessing.

When it is worth it

Not everyone needs a custom frame. It becomes worthwhile when production frames keep failing your proportions, when the position you need does not exist in your size, or when a custom build is already decided and the geometry should not be left to chance.

  • production frames force permanent compromises on you
  • the position you need sits outside the available geometries
  • a custom build is already decided and deserves proper measurement

How the session runs

It runs like a full sizing session with a different output. Establish the position, verify it, derive the geometry.

  • movement screening and position work on the fit bike
  • target geometry derived from the measured values
  • CAD drawing with the dimensions the frame has to meet
  • guidance on cockpit, crank length and components

What comes next

You take the drawing to a manufacturer of your choice. Once the frame is built, the position is transferred to the real bike and refined.

Frequently Asked Questions

How is this different from the normal buying advice session?

Buying advice finds the right bike among the ones you can buy. With a CAD design there is no finished bike β€” the geometry is drawn from your fit data, because a frame is going to be built.

Do I need a framebuilder already?

No. The drawing is independent and describes what the frame has to do. You can take it to any manufacturer who builds custom.

Do you sell the frames?

No. I do not sell bikes or frames and take no commission. I have no interest in who builds it β€” only in the numbers being right.

Does this replace a later bike fitting?

No. The CAD design fixes the geometry before anything is built. Once the frame exists and is assembled, the position is transferred and refined on the real bike.

How do I book the session?

Through the central booking hub. You will find the live calendar there and can pick a slot in Bensheim.

Plan your session

Reviews

What riders say

Genuine Google reviews from riders fitted at the Bensheim studio.

He first gets the most out of your existing parts and only recommends new ones when they are truly necessary. At the end you receive all the measurement data and comprehensive documentation.
Read the full review

I took my gravel bike to Lloyd for a bike fitting and I'm completely satisfied. The bike fitting is absolutely worth every penny, and I can highly recommend it to everyone, whether you're a hobby cyclist or a pro. Lloyd takes an incredible amount of time, explains each step clearly, and even beginners can understand everything. With great patience, the bike is optimally adjusted step by step. I especially appreciated that he doesn't try to sell you unnecessary new components. Instead, he first gets the most out of the existing parts and only recommends new ones when they are truly necessary and beneficial. Not only is the bike analyzed, but also the rider. Mobility, posture, and any limitations are taken into account. He also provides easy-to-implement exercises that can be easily integrated into everyday life and contribute to a better riding position in the long run. At the end, you receive all the measurement data as well as comprehensive documentation with recommendations for further exercises, useful accessories, and potential optimizations. The atmosphere throughout the entire appointment was also very pleasant, relaxed, and professional. Anyone considering a bike fitting is definitely in the right place at Lloyd. Highly recommended!

Emily Becker Gravel rider Β· Local Guide Google review
The very next day I did an FTP test and, without changing a single thing, my FTP jumped by almost 10% β€” purely thanks to the improved position.
Read the full review

If you're struggling with cycling comfort or want to boost your performance, I can't recommend a session with Lloyd enough. I'm currently preparing for two ultra-distance events in 2026, and I wasn't happy with the results of a previous bike fitting. That setup worked fine for shorter rides, but after about six hours in the saddle the problems started: numb feet, mild pain in my left leg, and some lower back discomfort. Because Lloyd's studio is close to the Rhine-Main area, and thanks to his excellent Google reviews and recommendations in various triathlon and cycling forums, I decided to book a session with him. Even though it's not exactly cheap, it was absolutely worth every cent. Lloyd is genuinely friendly and easygoing. We started with a conversation about my goals and issues, then a short bike session and a quick physical assessment β€” flexibility, foot position and so on. From there he methodically adjusted the bike setup and cleat position until we were both happy. After my first long ride with the new setup my initial impression was completely confirmed: the position feels perfect β€” no more aches, numbness or tension anywhere. And the very next day I did an FTP test and, without changing a single thing, my FTP jumped by almost 10%, purely thanks to the improved position. Thank you Lloyd, we'll definitely meet again!

Yannick H Ultra-distance rider Google review
Due to a leg-length difference we also fitted my shoes and the pain in my knee is gone since then. With the saddle pressure analysis I have no problems with long rides anymore.
Read the full review

I had a very special bike fitting experience with Lloyd. After an evaluation of my problems (knee, back, numb hands/toes) and my goals we did a video analysis to adjust all parameters at my bike. But Lloyd also put a strong focus on my specific body characteristics (flexibility, strength etc.) and defined a personal pre-ride routine for me. Due to a length difference in one leg we also fitted my shoes and the pain in my knee is gone since then! :) With the additional pressure analysis of my saddle, we identified an issue with my contact to the saddle. It ended up in getting a new saddle and not having any problems with long rides anymore. Overall a perfect fitting experience, especially as I was able to return to do some fine tuning after a few rides. Will be back with my next bike for sure - highly recommended!

Timo Maibach Knee & saddle issues solved Google review
I tried numerous online resources and even one that was "AI powered". None worked for me. Just one consultation with Lloyd and I can already feel the difference β€” comfort.
Read the full review

I am someone who has been struggling to get my proper fit for almost 2 years. I have tried numerous online resources and even one that was "AI powered". None of these options worked for me and over time I eventually developed some slight aches and pains outside of normal muscle stress and fatigue. I found Lloyd's shop and booked the soonest appointment I could. Just one consultation and I can already feel the difference compared to what I was doing before, and that difference is comfort and allows me to continue to enjoy the sport that we all have grown to love. Even if you aren't experiencing any issues I would recommend getting a consultation with your bike. It's quick, easy, and Lloyd is a professional who not only understands the stressors and importance of finding a good fit from his own experience but wants the same for you as well. I will definitely be back with my Road bike when I get one! Thanks Lloyd!

J Mo After failed online fits Google review
The custom insoles he created for me have greatly reduced my ankle pain and helped me be much stronger on the bike.
Read the full review

Lloyd helped me tremendously with my bike fit and custom insoles. He helped me specifically with adjustments on the bike to assist me with my right foot that is quite flat and this has made a great improvement to my pain on the bike. The custom insoles that he created for me have greatly reduced my ankle pain and helped me be much stronger on the bike. I can recommend Lloyd to help anyone who wants to be more comfortable on their bike.

Johann Grobler Custom insoles Β· foot pain Google review
Lloyd pinpointed the issues, told me what parts I needed to buy, and got them installed. The adjustments have made a world of difference and my bike feels great when I'm riding it.
Read the full review

Excellent service! I needed adjustments to my bike but with so much advice given to me, I didn't want to start changing parts myself and still have a problem. I went to Cyclefit and Lloyd pinpointed the issues, told me what parts I needed to buy, and got them installed on the bike. The adjustments have made a world of difference and my bike feels great when I'm riding it. I wish I would have visited him before I bought my bike but I'm very happy my bike was the right size and could be adjusted to fit me better. Many thanks!

Marisol Marrero Before a new bike Google review
My power output has increased massively after the fit, but this is actually just secondary to the amazing feeling on the bike. It really feels effortless and comfortable compared to before.
Read the full review

Absolutely mind blown. I would have never expected the positive impact the fit has had on my riding. Not only was Lloyd an absolute pro and awesome human being, the expertise he brings to the table is just tremendous. My power output has increased massively after the fit, but this is actually just secondary to the amazing feeling on the bike. It really feels effortless and comfortable compared to before. Would recommend 10000%! I will definitely return on a regular basis to check for changes and adapt to them. Thanks Lloyd, it has been an absolute blast.

Andre Kuhn Returns regularly Β· Local Guide Google review
You always leave with a smile on your face, better informed and with a world-class bike fit as well.
Read the full review

Was my second time at Cyclefit and for sure not the last. Lloyd knows what he's talking about and makes you feel very welcome. You always leave with a smile on your face, better informed and with a world-class bike fit as well.

Philip McPhee Returning rider Google review

Ready to book your session in Bensheim?

Plan your appointment and work directly with Lloyd Thomas.

Book your CAD design